Press the button on your remote for the corresponding component you wish to program. The buttons will read 'TV' or 'DVD.' Enter the three-digit code for the component selected on your controller number pad. The codes can be found either in your universal remote manual or on the manuals for the individual components. Jan 15, 2019 In order to program the remote, press the Code Search button until the LED lights solid red. Then press the button corresponding to the device type (TV, DVD, etc.). Input the four digit code for your device. The red light will turn off when a valid code is entered. Philips PMDVD6 Universal Digital DVD (6 Devices) Direct Code Entry • Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. • Press and release the desired Mode button ( TV, VCR, etc.). The red indicator blinks, then stays lit. Mr photo 1 6 download software. • Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. • With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. Code Search (by Brand) Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer. • Turn on the device (TV, VCR, etc.) to be controlled. • Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. ![]() • Press and release the desired Mode button ( TV, VCR, etc.). The red indicator blinks off once. • Press and release the numeric button ( 0-9) corresponding to desired Manufacturer (see below). Note, pressing ' 0' performs a full library search same as Device Library Code Search Method. Press the button on your remote for the corresponding component you wish to program. The buttons will read 'TV' or 'DVD.' Enter the three-digit code for the component selected on your controller number pad. The codes can be found either in your universal remote manual or on the manuals for the individual components. The red indicator should flash off after you enter your code. Press the 'channel up' button on your remote control until the programmed function responds. You are now free to use your universal remote on the component as normal. Repeat the process from Sep 1 to program a different component (your television, DVD player, stereo, etc.), until you have programmed all of them individually.
0 Comments
Leave a Reply. |